Commercial Vertical Slicer, Ø 350 mm (14") "Meat"

  • Last stock!

Description

  • Vertical, straight-blade slicer.
  • Double-feed carriage for slicing large joints of raw meat.
  • Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.
  • 50 mm gap between blade and motor.

  • Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).
  • Reinforced gauge plate, removable slider guard.
  • A maintenance Kit comes standard (incl. blade extractor).
  • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard.
  • End weight conceived for all shapes, even the smallest.
  • All handles, knobs and feet made of full aluminium.
  • Stainless steel screws (not visible) and deflector.
  • Fan-cooled motor.
  • Bottom enclosure panel .
  • Transmission pulley protected with a retaining ring.
  • Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure.
  • Dual-action built-in sharpener with protection bottom enclosure.
  • Adjustable feet.
  • Machine complying with the current CE standards.

Important: easy and safe cleaning thanks to:
1°) Rounded design, no sharp edges and visible screws.
2°) Wide gap between blade and body .
3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".
4°)Removable blade guard.
5°) Permanent tapered blade ring guard.

Technical Specification

  • mm (W x D x H) : 685 x 660 x 560 - kW (elec) : 0.37
  • Category: Diamond
  • Range: Dynamic Preparation
  • Subrange: Slicers
  • Family: Lame diam. 350 mm
  • Subfamily: SPECIAL MEAT
  • Line: SILVER LINE
  • Length: 685 mm
  • Width: 660 mm
  • Height: 560 mm
  • Electric Power: 0.37 kW
  • Weight: 55 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 35
  • Availability: 1

Technical specifications

  • Vertical, straight-blade slicer.
  • Double-feed carriage for slicing large joints of raw meat.
  • Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.
  • 50 mm gap between blade and motor.

  • Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).
  • Reinforced gauge plate, removable slider guard.
  • A maintenance Kit comes standard (incl. blade extractor).
  • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard.
  • End weight conceived for all shapes, even the smallest.
  • All handles, knobs and feet made of full aluminium.
  • Stainless steel screws (not visible) and deflector.
  • Fan-cooled motor.
  • Bottom enclosure panel .
  • Transmission pulley protected with a retaining ring.
  • Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure.
  • Dual-action built-in sharpener with protection bottom enclosure.
  • Adjustable feet.
  • Machine complying with the current CE standards.

Important: easy and safe cleaning thanks to:
1°) Rounded design, no sharp edges and visible screws.
2°) Wide gap between blade and body .
3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".
4°)Removable blade guard.
5°) Permanent tapered blade ring guard.

Technical Specification

  • mm (W x D x H) : 685 x 660 x 560 - kW (elec) : 0.37
  • Category: Diamond
  • Range: Dynamic Preparation
  • Subrange: Slicers
  • Family: Lame diam. 350 mm
  • Subfamily: SPECIAL MEAT
  • Line: SILVER LINE
  • Length: 685 mm
  • Width: 660 mm
  • Height: 560 mm
  • Electric Power: 0.37 kW
  • Weight: 55 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 35
  • Availability: 1
Product form

Commercial Vertical Slicer, Ø 350 mm (14") "Meat"

1 in stock Rask levering

Vertical, straight-blade slicer. Double-feed carriage for slicing large joints of raw meat. Max. cutting capacity: 250xh245 (Ø 245 mm), slice... Les mer

40.499,00 kr

    • Guaranteed secure & safe checkout.

      shop pay
    • Rask frakt for bestillinger på lager
    • Direkte fra produsenten til deg

    Description

    • Vertical, straight-blade slicer.
    • Double-feed carriage for slicing large joints of raw meat.
    • Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.
    • 50 mm gap between blade and motor.

    • Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).
    • Reinforced gauge plate, removable slider guard.
    • A maintenance Kit comes standard (incl. blade extractor).
    • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard.
    • End weight conceived for all shapes, even the smallest.
    • All handles, knobs and feet made of full aluminium.
    • Stainless steel screws (not visible) and deflector.
    • Fan-cooled motor.
    • Bottom enclosure panel .
    • Transmission pulley protected with a retaining ring.
    • Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure.
    • Dual-action built-in sharpener with protection bottom enclosure.
    • Adjustable feet.
    • Machine complying with the current CE standards.

    Important: easy and safe cleaning thanks to:
    1°) Rounded design, no sharp edges and visible screws.
    2°) Wide gap between blade and body .
    3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".
    4°)Removable blade guard.
    5°) Permanent tapered blade ring guard.

    Technical Specification

    • mm (W x D x H) : 685 x 660 x 560 - kW (elec) : 0.37
    • Category: Diamond
    • Range: Dynamic Preparation
    • Subrange: Slicers
    • Family: Lame diam. 350 mm
    • Subfamily: SPECIAL MEAT
    • Line: SILVER LINE
    • Length: 685 mm
    • Width: 660 mm
    • Height: 560 mm
    • Electric Power: 0.37 kW
    • Weight: 55 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 35
    • Availability: 1

    Technical specifications

    • Vertical, straight-blade slicer.
    • Double-feed carriage for slicing large joints of raw meat.
    • Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.
    • 50 mm gap between blade and motor.

    • Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).
    • Reinforced gauge plate, removable slider guard.
    • A maintenance Kit comes standard (incl. blade extractor).
    • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard.
    • End weight conceived for all shapes, even the smallest.
    • All handles, knobs and feet made of full aluminium.
    • Stainless steel screws (not visible) and deflector.
    • Fan-cooled motor.
    • Bottom enclosure panel .
    • Transmission pulley protected with a retaining ring.
    • Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure.
    • Dual-action built-in sharpener with protection bottom enclosure.
    • Adjustable feet.
    • Machine complying with the current CE standards.

    Important: easy and safe cleaning thanks to:
    1°) Rounded design, no sharp edges and visible screws.
    2°) Wide gap between blade and body .
    3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".
    4°)Removable blade guard.
    5°) Permanent tapered blade ring guard.

    Technical Specification

    • mm (W x D x H) : 685 x 660 x 560 - kW (elec) : 0.37
    • Category: Diamond
    • Range: Dynamic Preparation
    • Subrange: Slicers
    • Family: Lame diam. 350 mm
    • Subfamily: SPECIAL MEAT
    • Line: SILVER LINE
    • Length: 685 mm
    • Width: 660 mm
    • Height: 560 mm
    • Electric Power: 0.37 kW
    • Weight: 55 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 35
    • Availability: 1

    NY COCKTAILBAR FRA COMBISTEEL

    Ta en titt på den store cocktailbaren fra Combisteel



    SE DEN HER...

    Retur og levering

    Når vil bestillingen min bli levert?

    Vi sender til et bredt spekter av europeiske. Bestillingen din vil bli pakket veldig nøye og levert så raskt som mulig. Levering tar mellom 2-5 virkedager. Du vil motta en e-post etter bestilling.

    Kan jeg returnere produktet mitt?

    Bestillinger kan returneres eller byttes innen forutsatt at de er i original stand og den originale emballasjen er intakt. Les mer om retur i våre vilkår og betingelser.

    Hva kan jeg gjøre hvis varen min (eller deler av den) er skadet?

    Vi jobber hardt for å levere varene dine uten skader. Kontroller alltid varene ved levering. Hvis emballasjen fremstår som skadet, kan du nekte å akseptere forsendelsen eller informere transportøren om at du mottar varene med forbehold, da varen kan være skadet.



    Nylig viste produkter

      © 2026 Maxigastro International, Made By MXGDEV

        • American Express
        • Apple Pay
        • Bancontact
        • BLIK
        • Google Pay
        • Klarna
        • Maestro
        • Mastercard
        • MobilePay
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account