Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears" STONEHENGE PLUS

  • Last stock!

Description

  • Completely coated with a special ceramic treatment.
  • Gear drive system with "worm screw" in oil bath, "self-lubricating".
  • Oblique blade, 35° inclination (standard blade extractor);
  • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
  • 50 mm space between blade and chassis.

  • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
  • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
  • Reinforced stop, removable stop slide protection.
  • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
  • Pusher for all products (even the smallest ones).
  • Invisible screws and stainless steel deflector.
  • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
  • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
  • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
  • Adjustable jacks.
  • Device built in compliance with current CE standards.

Important: easy and safe maintenance thanks to:

  1. its design with rounded shapes without corners, sharp edges or visible screws;
  2. wide space between blade and chassis;
  3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
  4. removable blade cover;
  5. protection ring fixed around the blade.

ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

Technical Specification

  • mm (W x D x H) : 575 x 575 x 530 - kW (elec) : 0.4
  • Category: Diamond
  • Range: Dynamic Preparation
  • Subrange: Slicers
  • Family: Lame diam. 350 mm
  • Subfamily: TRANSMITION GEARS
  • Line: TOP LINE
  • Length: 575 mm
  • Width: 575 mm
  • Height: 530 mm
  • Electric Power: 0.4 kW
  • Weight: 43 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 35
  • Availability: 3

Technical specifications

  • Completely coated with a special ceramic treatment.
  • Gear drive system with "worm screw" in oil bath, "self-lubricating".
  • Oblique blade, 35° inclination (standard blade extractor);
  • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
  • 50 mm space between blade and chassis.

  • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
  • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
  • Reinforced stop, removable stop slide protection.
  • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
  • Pusher for all products (even the smallest ones).
  • Invisible screws and stainless steel deflector.
  • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
  • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
  • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
  • Adjustable jacks.
  • Device built in compliance with current CE standards.

Important: easy and safe maintenance thanks to:

  1. its design with rounded shapes without corners, sharp edges or visible screws;
  2. wide space between blade and chassis;
  3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
  4. removable blade cover;
  5. protection ring fixed around the blade.

ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

Technical Specification

  • mm (W x D x H) : 575 x 575 x 530 - kW (elec) : 0.4
  • Category: Diamond
  • Range: Dynamic Preparation
  • Subrange: Slicers
  • Family: Lame diam. 350 mm
  • Subfamily: TRANSMITION GEARS
  • Line: TOP LINE
  • Length: 575 mm
  • Width: 575 mm
  • Height: 530 mm
  • Electric Power: 0.4 kW
  • Weight: 43 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 35
  • Availability: 3
Product form

Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears" STONEHENGE PLUS

3 in stock Rask levering

Completely coated with a special ceramic treatment. Gear drive system with "worm screw" in oil bath, "self-lubricating". Oblique blade, 35°... Les mer

36.979,00 kr

    • Guaranteed secure & safe checkout.

      shop pay
    • Rask frakt for bestillinger på lager
    • Direkte fra produsenten til deg

    Description

    • Completely coated with a special ceramic treatment.
    • Gear drive system with "worm screw" in oil bath, "self-lubricating".
    • Oblique blade, 35° inclination (standard blade extractor);
    • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
    • 50 mm space between blade and chassis.

    • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
    • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
    • Reinforced stop, removable stop slide protection.
    • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
    • Pusher for all products (even the smallest ones).
    • Invisible screws and stainless steel deflector.
    • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
    • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
    • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
    • Adjustable jacks.
    • Device built in compliance with current CE standards.

    Important: easy and safe maintenance thanks to:

    1. its design with rounded shapes without corners, sharp edges or visible screws;
    2. wide space between blade and chassis;
    3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
    4. removable blade cover;
    5. protection ring fixed around the blade.

    ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

    Technical Specification

    • mm (W x D x H) : 575 x 575 x 530 - kW (elec) : 0.4
    • Category: Diamond
    • Range: Dynamic Preparation
    • Subrange: Slicers
    • Family: Lame diam. 350 mm
    • Subfamily: TRANSMITION GEARS
    • Line: TOP LINE
    • Length: 575 mm
    • Width: 575 mm
    • Height: 530 mm
    • Electric Power: 0.4 kW
    • Weight: 43 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 35
    • Availability: 3

    Technical specifications

    • Completely coated with a special ceramic treatment.
    • Gear drive system with "worm screw" in oil bath, "self-lubricating".
    • Oblique blade, 35° inclination (standard blade extractor);
    • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
    • 50 mm space between blade and chassis.

    • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
    • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
    • Reinforced stop, removable stop slide protection.
    • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
    • Pusher for all products (even the smallest ones).
    • Invisible screws and stainless steel deflector.
    • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
    • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
    • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
    • Adjustable jacks.
    • Device built in compliance with current CE standards.

    Important: easy and safe maintenance thanks to:

    1. its design with rounded shapes without corners, sharp edges or visible screws;
    2. wide space between blade and chassis;
    3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
    4. removable blade cover;
    5. protection ring fixed around the blade.

    ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

    Technical Specification

    • mm (W x D x H) : 575 x 575 x 530 - kW (elec) : 0.4
    • Category: Diamond
    • Range: Dynamic Preparation
    • Subrange: Slicers
    • Family: Lame diam. 350 mm
    • Subfamily: TRANSMITION GEARS
    • Line: TOP LINE
    • Length: 575 mm
    • Width: 575 mm
    • Height: 530 mm
    • Electric Power: 0.4 kW
    • Weight: 43 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 35
    • Availability: 3

    NY COCKTAILBAR FRA COMBISTEEL

    Ta en titt på den store cocktailbaren fra Combisteel



    SE DEN HER...

    Retur og levering

    Når vil bestillingen min bli levert?

    Vi sender til et bredt spekter av europeiske. Bestillingen din vil bli pakket veldig nøye og levert så raskt som mulig. Levering tar mellom 2-5 virkedager. Du vil motta en e-post etter bestilling.

    Kan jeg returnere produktet mitt?

    Bestillinger kan returneres eller byttes innen forutsatt at de er i original stand og den originale emballasjen er intakt. Les mer om retur i våre vilkår og betingelser.

    Hva kan jeg gjøre hvis varen min (eller deler av den) er skadet?

    Vi jobber hardt for å levere varene dine uten skader. Kontroller alltid varene ved levering. Hvis emballasjen fremstår som skadet, kan du nekte å akseptere forsendelsen eller informere transportøren om at du mottar varene med forbehold, da varen kan være skadet.



    Nylig viste produkter

      © 2026 Maxigastro International, Made By MXGDEV

        • American Express
        • Apple Pay
        • Bancontact
        • BLIK
        • Google Pay
        • Klarna
        • Maestro
        • Mastercard
        • MobilePay
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account