Commercial Gravity-feed Slicer, Ø 350 mm STONEHENGE PLUS

  • Sista lager!

Beskrivning

  • Completely coated with a special ceramic treatment.
  • Oblique blade, 35° inclination (standard blade extractor).
  • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
  • 50 mm space between blade and chassis.

  • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
  • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
  • Reinforced stop, removable stop slide protection.
  • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
  • Pusher for all products (even the smallest ones).
  • Invisible screws and stainless steel deflector.
  • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
  • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
  • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
  • Adjustable jacks.
  • Device built in compliance with current CE standards.

Important: easy and safe maintenance thanks to:

  1. its design with rounded shapes without corners, sharp edges or visible screws;
  2. wide space between blade and chassis;
  3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
  4. removable blade cover;
  5. protection ring fixed around the blade.

ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

Technical Specification

  • mm (W x D x H) : 575 x 615 x 530 - kW (elec) : 0.28
  • Category: Diamond
  • Range: Dynamic Preparation
  • Subrange: Slicers
  • Family: Lame diam. 350 mm
  • Line: TOP LINE
  • Length: 575 mm
  • Width: 615 mm
  • Height: 530 mm
  • Electric Power: 0.28 kW
  • Weight: 42 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 35
  • Availability: 3

Technical specifications

  • Completely coated with a special ceramic treatment.
  • Oblique blade, 35° inclination (standard blade extractor).
  • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
  • 50 mm space between blade and chassis.

  • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
  • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
  • Reinforced stop, removable stop slide protection.
  • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
  • Pusher for all products (even the smallest ones).
  • Invisible screws and stainless steel deflector.
  • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
  • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
  • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
  • Adjustable jacks.
  • Device built in compliance with current CE standards.

Important: easy and safe maintenance thanks to:

  1. its design with rounded shapes without corners, sharp edges or visible screws;
  2. wide space between blade and chassis;
  3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
  4. removable blade cover;
  5. protection ring fixed around the blade.

ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

Technical Specification

  • mm (W x D x H) : 575 x 615 x 530 - kW (elec) : 0.28
  • Category: Diamond
  • Range: Dynamic Preparation
  • Subrange: Slicers
  • Family: Lame diam. 350 mm
  • Line: TOP LINE
  • Length: 575 mm
  • Width: 615 mm
  • Height: 530 mm
  • Electric Power: 0.28 kW
  • Weight: 42 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 35
  • Availability: 3
Produktform

Commercial Gravity-feed Slicer, Ø 350 mm STONEHENGE PLUS

3 i lager Snabb leverans

Completely coated with a special ceramic treatment. Oblique blade, 35° inclination (standard blade extractor). Max cutting capacity: 270xh230 mm (Ø... Läs mer

29,143.00 kr

    • Guaranteed secure & safe checkout.

      shop pay
    • Snabb leverans för beställningar på lager
    • Direkt från tillverkare till dig

    Beskrivning

    • Completely coated with a special ceramic treatment.
    • Oblique blade, 35° inclination (standard blade extractor).
    • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
    • 50 mm space between blade and chassis.

    • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
    • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
    • Reinforced stop, removable stop slide protection.
    • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
    • Pusher for all products (even the smallest ones).
    • Invisible screws and stainless steel deflector.
    • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
    • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
    • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
    • Adjustable jacks.
    • Device built in compliance with current CE standards.

    Important: easy and safe maintenance thanks to:

    1. its design with rounded shapes without corners, sharp edges or visible screws;
    2. wide space between blade and chassis;
    3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
    4. removable blade cover;
    5. protection ring fixed around the blade.

    ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

    Technical Specification

    • mm (W x D x H) : 575 x 615 x 530 - kW (elec) : 0.28
    • Category: Diamond
    • Range: Dynamic Preparation
    • Subrange: Slicers
    • Family: Lame diam. 350 mm
    • Line: TOP LINE
    • Length: 575 mm
    • Width: 615 mm
    • Height: 530 mm
    • Electric Power: 0.28 kW
    • Weight: 42 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 35
    • Availability: 3

    Technical specifications

    • Completely coated with a special ceramic treatment.
    • Oblique blade, 35° inclination (standard blade extractor).
    • Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm.
    • 50 mm space between blade and chassis.

    • Elegant and high-performing, made from anodized and polished aluminum alloy casting.
    • Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure).
    • Reinforced stop, removable stop slide protection.
    • Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection.
    • Pusher for all products (even the smallest ones).
    • Invisible screws and stainless steel deflector.
    • Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley.
    • 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups.
    • Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray.
    • Adjustable jacks.
    • Device built in compliance with current CE standards.

    Important: easy and safe maintenance thanks to:

    1. its design with rounded shapes without corners, sharp edges or visible screws;
    2. wide space between blade and chassis;
    3. "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0";
    4. removable blade cover;
    5. protection ring fixed around the blade.

    ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.

    Technical Specification

    • mm (W x D x H) : 575 x 615 x 530 - kW (elec) : 0.28
    • Category: Diamond
    • Range: Dynamic Preparation
    • Subrange: Slicers
    • Family: Lame diam. 350 mm
    • Line: TOP LINE
    • Length: 575 mm
    • Width: 615 mm
    • Height: 530 mm
    • Electric Power: 0.28 kW
    • Weight: 42 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 35
    • Availability: 3

    NY COCKTAILBAR FRÅN COMBISTEEL

    Ta en titt på den storslagna cocktailbaren från Combisteel



    SE DEN HÄR...

    Returer & leverans

    När kommer min beställning att levereras?

    Vi skickar till ett brett utbud av europeiska. Din beställning kommer att packas väldigt noggrant och levereras så snabbt som möjligt. Leveransen tar mellan 2-5 arbetsdagar. Du kommer att få ett e-postmeddelande efter beställning.

    Kan jag returnera min produkt?

    Beställningar kan returneras eller bytas inom förutsatt att de är i original återförsäljningsbart skick och originalförpackningen är intakt. Läs mer om returer i våra villkor.

    Vad kan jag göra om min vara (eller en del av den) är skadad?

    Vi jobbar hårt för att leverera dina varor utan skador. Inspektera alltid varorna vid leverans. Om förpackningen verkar skadad kan du vägra att ta emot försändelsen eller meddela transportören att du tar emot varan med reservation, eftersom varan kan vara skadad.



    Nyligen visade produkter

      © 2026 Maxigastro International, Made By MXGDEV

        • American Express
        • Apple Pay
        • Bancontact
        • BLIK
        • Google Pay
        • Klarna
        • Maestro
        • Mastercard
        • MobilePay
        • Shop Pay
        • Union Pay
        • Visa

        Logga in

        Glömt ditt lösenord?

        Har du inget konto än?
        Skapa konto