Room ISO 80, int. dim. 2630 x 1830 xh 2030 mm (9,77 m³)

Beskrivelse

  • Internal dimensions: 2630x1830xh2030 mm.
  • Internal volume 9,77 m³.
  • Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides).
  • Door seal fitted with a peripheral heating cord (for negative T°).
  • Vacuum valve (for negative T°).

  • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
  • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
  • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
  • Panels locked by built-in ‘eccentric’ hooks.
  • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
  • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
  • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
  • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
  • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
  • Equipment built in compliance with current EC standards.

PLUS :

  • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
  • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
  • Floor covered in non-slip phenolic ‘honeycomb’ resin.
  • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
  • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
  • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

Technical Specification

  • mm (W x D x H) : 2790 x 1990 x 2190
  • Category: Diamond
  • Range: Refrigeration
  • Subrange: Cold & freezing rooms
  • Family: Isolation 80 mm
  • Subfamily: 9,83 Vol/M3 / WHITE
  • Line: MINICOLD 80 EVO
  • Length: 2790 mm
  • Width: 1990 mm
  • Height: 2190 mm
  • Weight: 520 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 42
  • Availability: 2

Technical specifications

  • Internal dimensions: 2630x1830xh2030 mm.
  • Internal volume 9,77 m³.
  • Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides).
  • Door seal fitted with a peripheral heating cord (for negative T°).
  • Vacuum valve (for negative T°).

  • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
  • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
  • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
  • Panels locked by built-in ‘eccentric’ hooks.
  • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
  • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
  • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
  • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
  • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
  • Equipment built in compliance with current EC standards.

PLUS :

  • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
  • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
  • Floor covered in non-slip phenolic ‘honeycomb’ resin.
  • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
  • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
  • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

Technical Specification

  • mm (W x D x H) : 2790 x 1990 x 2190
  • Category: Diamond
  • Range: Refrigeration
  • Subrange: Cold & freezing rooms
  • Family: Isolation 80 mm
  • Subfamily: 9,83 Vol/M3 / WHITE
  • Line: MINICOLD 80 EVO
  • Length: 2790 mm
  • Width: 1990 mm
  • Height: 2190 mm
  • Weight: 520 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 42
  • Availability: 2

Læs mere

Produktform

Room ISO 80, int. dim. 2630 x 1830 xh 2030 mm (9,77 m³)

2 på lager Hurtig levering

Internal dimensions: 2630x1830xh2030 mm. Internal volume 9,77 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4... Læs mere

37.932,00 kr

    • Guaranteed secure & safe checkout.

      shop pay
    • Hurtig forsendelse for bestillinger på lager
    • Direkte fra producent til dig

    Beskrivelse

    • Internal dimensions: 2630x1830xh2030 mm.
    • Internal volume 9,77 m³.
    • Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides).
    • Door seal fitted with a peripheral heating cord (for negative T°).
    • Vacuum valve (for negative T°).

    • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
    • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
    • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
    • Panels locked by built-in ‘eccentric’ hooks.
    • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
    • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
    • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
    • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
    • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
    • Equipment built in compliance with current EC standards.

    PLUS :

    • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
    • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
    • Floor covered in non-slip phenolic ‘honeycomb’ resin.
    • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
    • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
    • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

    Technical Specification

    • mm (W x D x H) : 2790 x 1990 x 2190
    • Category: Diamond
    • Range: Refrigeration
    • Subrange: Cold & freezing rooms
    • Family: Isolation 80 mm
    • Subfamily: 9,83 Vol/M3 / WHITE
    • Line: MINICOLD 80 EVO
    • Length: 2790 mm
    • Width: 1990 mm
    • Height: 2190 mm
    • Weight: 520 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 42
    • Availability: 2

    Technical specifications

    • Internal dimensions: 2630x1830xh2030 mm.
    • Internal volume 9,77 m³.
    • Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides).
    • Door seal fitted with a peripheral heating cord (for negative T°).
    • Vacuum valve (for negative T°).

    • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
    • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
    • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
    • Panels locked by built-in ‘eccentric’ hooks.
    • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
    • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
    • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
    • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
    • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
    • Equipment built in compliance with current EC standards.

    PLUS :

    • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
    • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
    • Floor covered in non-slip phenolic ‘honeycomb’ resin.
    • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
    • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
    • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

    Technical Specification

    • mm (W x D x H) : 2790 x 1990 x 2190
    • Category: Diamond
    • Range: Refrigeration
    • Subrange: Cold & freezing rooms
    • Family: Isolation 80 mm
    • Subfamily: 9,83 Vol/M3 / WHITE
    • Line: MINICOLD 80 EVO
    • Length: 2790 mm
    • Width: 1990 mm
    • Height: 2190 mm
    • Weight: 520 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 42
    • Availability: 2

    Læs mere

    NY COCKTAIL BAR FRA COMBISTEEL

    Tag et kig på den store cocktailbar fra Combisteel



    SE DET HER...

    Returnering & levering

    Hvornår bliver min ordre leveret?

    Vi sender til en stort udvalg af europæiske. Din ordre vil blive pakket rigtig omhyggeligt og leveret så hurtigt som muligt. Levering tager mellem 2-5 hverdage. Du modtager en e-mail efter bestilling.

    Kan jeg returnere mit produkt?

    Ordrer kan returneres eller ombyttes, forudsat at de er i original stand, der kan sælges, og den originale emballage er intakt. Læs mere om returnering i vores handelsbetingelser.

    Hvad kan jeg gøre, hvis min vare (eller en del af den) er beskadiget?

    Vi arbejder hårdt på at levere dine varer uden skader. Undersøg altid varerne ved levering. Hvis emballagen fremstår beskadiget, kan du nægte at modtage forsendelsen eller informere transportøren om, at du modtager varen med forbehold, da varen kan være beskadiget.



    Senest sete produkter

      © 2026 Maxigastro International, Made By MXGDEV

        • American Express
        • Apple Pay
        • Bancontact
        • BLIK
        • Google Pay
        • Klarna
        • Maestro
        • Mastercard
        • MobilePay
        • Shop Pay
        • Union Pay
        • Visa

        Log ind

        Har du glemt din adgangskode?

        Har du ikke en konto endnu?
        Opret konto