Room ISO 80, int. dim. 1230 x 1030 xh 2030 mm (2,57 m³)

  • Dernier stock !

Descriptif

  • Internal dimensions: 1230x1030xh2030 mm.
  • Internal volume 2,57 m³.
  • Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides).
  • Door seal fitted with a peripheral heating cord (for negative T°).
  • Vacuum valve (for negative T°).
  • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
  • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
  • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
  • Panels locked by built-in ‘eccentric’ hooks.
  • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
  • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
  • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
  • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
  • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
  • Equipment built in compliance with current EC standards.

PLUS :

  • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
  • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
  • Floor covered in non-slip phenolic ‘honeycomb’ resin.
  • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
  • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
  • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

Technical Specification

  • mm (W x D x H) : 1390 x 1190 x 2190
  • Category: Diamond
  • Range: Refrigeration
  • Subrange: Cold & freezing rooms
  • Family: Isolation 80 mm
  • Subfamily: 2,27 Vol/M3 / WHITE
  • Line: MINICOLD 80 EVO
  • Length: 1390 mm
  • Width: 1190 mm
  • Height: 2190 mm
  • Weight: 210 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 42
  • Availability: 4

Technical specifications

  • Internal dimensions: 1230x1030xh2030 mm.
  • Internal volume 2,57 m³.
  • Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides).
  • Door seal fitted with a peripheral heating cord (for negative T°).
  • Vacuum valve (for negative T°).
  • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
  • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
  • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
  • Panels locked by built-in ‘eccentric’ hooks.
  • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
  • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
  • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
  • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
  • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
  • Equipment built in compliance with current EC standards.

PLUS :

  • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
  • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
  • Floor covered in non-slip phenolic ‘honeycomb’ resin.
  • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
  • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
  • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

Technical Specification

  • mm (W x D x H) : 1390 x 1190 x 2190
  • Category: Diamond
  • Range: Refrigeration
  • Subrange: Cold & freezing rooms
  • Family: Isolation 80 mm
  • Subfamily: 2,27 Vol/M3 / WHITE
  • Line: MINICOLD 80 EVO
  • Length: 1390 mm
  • Width: 1190 mm
  • Height: 2190 mm
  • Weight: 210 kg
  • Restock Info: Contact
  • Supplier Delivery Delay: 42
  • Availability: 4

Lire plus

Forme du produit

Room ISO 80, int. dim. 1230 x 1030 xh 2030 mm (2,57 m³)

4 en stock Livraison rapide

Internal dimensions: 1230x1030xh2030 mm. Internal volume 2,57 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4... Lire la suite

€2.716,73

    • Guaranteed secure & safe checkout.

      shop pay
    • Expédition rapide pour les commandes en stock
    • Directement du fabricant à toi

    Descriptif

    • Internal dimensions: 1230x1030xh2030 mm.
    • Internal volume 2,57 m³.
    • Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides).
    • Door seal fitted with a peripheral heating cord (for negative T°).
    • Vacuum valve (for negative T°).
    • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
    • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
    • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
    • Panels locked by built-in ‘eccentric’ hooks.
    • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
    • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
    • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
    • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
    • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
    • Equipment built in compliance with current EC standards.

    PLUS :

    • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
    • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
    • Floor covered in non-slip phenolic ‘honeycomb’ resin.
    • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
    • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
    • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

    Technical Specification

    • mm (W x D x H) : 1390 x 1190 x 2190
    • Category: Diamond
    • Range: Refrigeration
    • Subrange: Cold & freezing rooms
    • Family: Isolation 80 mm
    • Subfamily: 2,27 Vol/M3 / WHITE
    • Line: MINICOLD 80 EVO
    • Length: 1390 mm
    • Width: 1190 mm
    • Height: 2190 mm
    • Weight: 210 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 42
    • Availability: 4

    Technical specifications

    • Internal dimensions: 1230x1030xh2030 mm.
    • Internal volume 2,57 m³.
    • Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides).
    • Door seal fitted with a peripheral heating cord (for negative T°).
    • Vacuum valve (for negative T°).
    • Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
    • Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
    • High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
    • Panels locked by built-in ‘eccentric’ hooks.
    • Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
    • Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
    • The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
    • 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
    • Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009.
    • Equipment built in compliance with current EC standards.

    PLUS :

    • Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
    • The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
    • Floor covered in non-slip phenolic ‘honeycomb’ resin.
    • All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
    • Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
    • On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.

    Technical Specification

    • mm (W x D x H) : 1390 x 1190 x 2190
    • Category: Diamond
    • Range: Refrigeration
    • Subrange: Cold & freezing rooms
    • Family: Isolation 80 mm
    • Subfamily: 2,27 Vol/M3 / WHITE
    • Line: MINICOLD 80 EVO
    • Length: 1390 mm
    • Width: 1190 mm
    • Height: 2190 mm
    • Weight: 210 kg
    • Restock Info: Contact
    • Supplier Delivery Delay: 42
    • Availability: 4

    Lire plus

    NOUVEAU BAR À COCKTAILS DE COMBISTEEL

    Jetez un œil au grand bar à cocktails de Combisteel



    VOIR ICI...

    Retours et livraison

    Quand ma commande sera-t-elle livrée ?

    Nous expédions dans un large éventail de pays européens. Votre commande sera emballée avec le plus grand soin et livrée le plus rapidement possible. La livraison prend entre 2 et 5 jours ouvrables. Vous recevrez un e-mail après la commande.

    Puis-je retourner mon produit ?

    Les commandes peuvent être retournées ou échangées à condition qu'elles soient dans leur état de revente d'origine et que l'emballage d'origine soit intact. En savoir plus sur les retours dans nos conditions générales.

    Que puis-je faire si mon article (ou une partie de celui-ci) est endommagé ?

    Nous travaillons dur pour livrer vos articles sans dommage. Inspectez toujours les marchandises à la livraison. Si l'emballage semble endommagé, vous pouvez refuser d'accepter l'envoi ou informer le transporteur que vous recevez la marchandise avec réserve, car l'article pourrait être endommagé.



    Produits récemment consultés

      © 2026 Maxigastro International, Made By MXGDEV

        • American Express
        • Apple Pay
        • Bancontact
        • BLIK
        • Google Pay
        • Klarna
        • Maestro
        • Mastercard
        • MobilePay
        • Shop Pay
        • Union Pay
        • Visa

        Connexion

        Vous avez oublié votre mot de passe ?

        Vous n'avez pas encore de compte ?
        Créer un compte