kølerum

208 products

  • Room ISO 100, int. dim. 1830 x 1230 xh 2030 mm (4,57 m³)

    Diamond Room ISO 100, int. dim. 1830 x 1230 xh 2030 mm (4,57 m³)

    In stock

    Internal dimensions: 1830x1230xh2030 mm. Internal volume 4,57 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2030 x 1430 x 2230 Category: Diamond Range: Refrigeration Subfamily: 4,45 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2030 mm Width: 1430 mm Height: 2230 mm Weight: 350 kg Technical

    In stock

    46.012,00 kr
    excl. VAT 57.515,00 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    The Diamond Assembly cold room is designed to provide precise temperature control in commercial kitchens. With its advanced technology and durable construction, this system ensures reliable performance and accurate readings.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 3,92 Vol/M3/ T°-18° -22°/WHITE Line: MINICOLD ISO 80 PLUS

    In stock

    61.946,00 kr
    excl. VAT 77.432,50 kr incl.

  • Room ISO 100, int. dim. 2030 x 1030 xh 2030 mm (4,24 m³)

    Diamond Room ISO 100, int. dim. 2030 x 1030 xh 2030 mm (4,24 m³)

    In stock

    Internal dimensions: 2030x1030xh2030 mm. Internal volume 4,24 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2230 x 1230 x 2230 Category: Diamond Range: Refrigeration Subfamily: 3,92 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2230 mm Width: 1230 mm Height: 2230 mm Weight: 345 kg Technical

    In stock

    43.600,00 kr
    excl. VAT 54.500,00 kr incl.

  • Room ISO 80, int. dim. 2030 x 1030 xh 2030 mm (4,24 m³)

    Diamond Room ISO 80, int. dim. 2030 x 1030 xh 2030 mm (4,24 m³)

    In stock

    Internal dimensions: 2030x1030xh2030 mm. Internal volume 4,24 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2190 x 1190 x 2190 Category: Diamond Range: Refrigeration Subfamily: 3,92 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 2190 mm Width: 1190 mm Height: 2190 mm Weight: 320 kg Technical

    In stock

    40.651,00 kr
    excl. VAT 50.813,75 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond's Assembly cold room is designed to provide precise temperature control in commercial kitchens. With its advanced technology and durable construction, this system ensures reliable performance and accurate readings.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 3,72 Vol/M3 /T°-18° -22°/WHITE Line: MINICOLD ISO 80 PLUS

    In stock

    97.664,00 kr
    excl. VAT 122.080,00 kr incl.

  • Room ISO 100, int. dim. 1430 x 1230 xh 2030 mm (3,57 m³)

    Diamond Room ISO 100, int. dim. 1430 x 1230 xh 2030 mm (3,57 m³)

    In stock

    Internal dimensions: 1430x1230xh2030 mm. Internal volume 3,57 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1630 x 1430 x 2230 Category: Diamond Range: Refrigeration Subfamily: 3,72 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 1630 mm Width: 1430 mm Height: 2230 mm Weight: 310 kg Technical

    In stock

    42.260,00 kr
    excl. VAT 52.825,00 kr incl.

  • Room ISO 80, int. dim. 1430 x 1230 xh 2030 mm (3,57 m³)

    Diamond Room ISO 80, int. dim. 1430 x 1230 xh 2030 mm (3,57 m³)

    In stock

    Internal dimensions: 1430x1230xh2030 mm. Internal volume 3,57 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1590 x 1390 x 2190 Category: Diamond Range: Refrigeration Subfamily: 3,72 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1590 mm Width: 1390 mm Height: 2190 mm Weight: 290 kg Technical

    In stock

    39.628,00 kr
    excl. VAT 49.535,00 kr incl.

  • Combi cold room ISO 100, int. dim. 2830 x 3630 & 2830 x 2030 xh 2230 mm (22,91 + 12,81 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 3630 & 2830 x 2030 xh 2230 mm (22,91 + 12,81 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x3630xh2230 mm (internal volume 22,91m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x2030xh2230 mm (internal volume 12,81m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 3030 x 5960 x 2430 Category: Diamond Range: Refrigeration Subfamily: 22,5 + 13,5 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 5960 mm Height: 2430 mm Weight: 1370 kg Technical

    In stock

    147.524,00 kr
    excl. VAT 184.405,00 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond's Assembly cold room is a comprehensive solution for commercial kitchens. This high-performance system features advanced temperature control and precise cooling capabilities, making it ideal for storing food at optimal temperatures.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 3,37 Vol/M3 /T°-18° -22°/WHITE Line: MINICOLD ISO 80 PLUS

    In stock

    58.035,00 kr
    excl. VAT 72.543,75 kr incl.

  • Room ISO 100, int. dim. 1830 x 1030 xh 2030 mm (3,83 m³)

    Diamond Room ISO 100, int. dim. 1830 x 1030 xh 2030 mm (3,83 m³)

    In stock

    Internal dimensions: 1830x1030xh2030 mm. Internal volume 3,83 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2030 x 1230 x 2230 Category: Diamond Range: Refrigeration Subfamily: 3,37 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2030 mm Width: 1230 mm Height: 2230 mm Weight: 330 kg Technical

    In stock

    39.190,00 kr
    excl. VAT 48.987,50 kr incl.

  • Room ISO 80, int. dim. 1830 x 1030 xh 2030 mm (3,83 m³)

    Diamond Room ISO 80, int. dim. 1830 x 1030 xh 2030 mm (3,83 m³)

    In stock

    Internal dimensions: 1830x1030xh2030 mm. Internal volume 3,83 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1990 x 1190 x 2190 Category: Diamond Range: Refrigeration Subfamily: 3,37 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1990 mm Width: 1190 mm Height: 2190 mm Weight: 300 kg Technical

    In stock

    36.754,00 kr
    excl. VAT 45.942,50 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    The Diamond Assembly cold room is designed to provide precise temperature control in commercial kitchens. With its advanced technology and durable construction, this system ensures reliable performance and accurate readings.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 3 Vol/M3 / T°-5° +5° / WHITE Line: MINICOLD ISO 80 PLUS

    In stock

    56.890,00 kr
    excl. VAT 71.112,50 kr incl.

  • Room ISO 80, int. dim. 1230 x 1230 xh 2030 mm (3,07 m³)

    Diamond Room ISO 80, int. dim. 1230 x 1230 xh 2030 mm (3,07 m³)

    In stock

    Internal dimensions: 1230x1230xh2030 mm. Internal volume 3,07 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1390 x 1390 x 2190 Category: Diamond Range: Refrigeration Subfamily: 3 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1390 mm Width: 1390 mm Height: 2190 mm Weight: 260 kg Technical

    In stock

    35.596,00 kr
    excl. VAT 44.495,00 kr incl.

  • Combi cold room ISO 100, int. dim. 2830 x 3230 & 2830 x 1830 xh 2230 mm (20,38 + 11,55 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 3230 & 2830 x 1830 xh 2230 mm (20,38 + 11,55 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x3230xh2230 mm (internal volume 20,38m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x1830xh2230 mm (internal volume 11,55m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 3030 x 5360 x 2430 Category: Diamond Range: Refrigeration Subfamily: 20,61 + 11,15 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 5360 mm Height: 2430 mm Weight: 1280 kg Technical

    In stock

    140.032,00 kr
    excl. VAT 175.040,00 kr incl.

  • Room ISO 100, int. dim. 1230 x 1230 xh 2030 mm (3,07 m³)

    Diamond Room ISO 100, int. dim. 1230 x 1230 xh 2030 mm (3,07 m³)

    In stock

    Internal dimensions: 1230x1230xh2030 mm. Internal volume 3,07 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1430 x 1430 x 2230 Category: Diamond Range: Refrigeration Subfamily: 3 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 1430 mm Width: 1430 mm Height: 2230 mm Weight: 290 kg Technical

    In stock

    38.143,00 kr
    excl. VAT 47.678,75 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    The Diamond Assembly cold room is designed to provide precise temperature control in commercial kitchens. With its advanced technology and durable construction, this system ensures reliable performance and accurate readings.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 2,82 Vol/M3 /T°-5° +5°/WHITE Line: MINICOLD ISO 80 PLUS

    In stock

    55.001,00 kr
    excl. VAT 68.751,25 kr incl.

  • Room ISO 80, int. dim. 1430 x 1030 xh 2030 mm (2,99 m³)

    Diamond Room ISO 80, int. dim. 1430 x 1030 xh 2030 mm (2,99 m³)

    In stock

    Internal dimensions: 1430x1030xh2030 mm. Internal volume 2,99 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1590 x 1190 x 2190 Category: Diamond Range: Refrigeration Subfamily: 2,82 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1590 mm Width: 1190 mm Height: 2190 mm Weight: 260 kg Technical

    In stock

    33.708,00 kr
    excl. VAT 42.135,00 kr incl.

  • Room ISO 100, int. dim. 1430 x 1030 xh 2030 mm (2,99 m³)

    Diamond Room ISO 100, int. dim. 1430 x 1030 xh 2030 mm (2,99 m³)

    In stock

    Internal dimensions: 1430x1030xh2030 mm. Internal volume 2,99 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1630 x 1230 x 2230 Category: Diamond Range: Refrigeration Subfamily: 2,82 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 1630 mm Width: 1230 mm Height: 2230 mm Weight: 290 kg Technical

    In stock

    35.840,00 kr
    excl. VAT 44.800,00 kr incl.

  • Combi cold rooms ISO 100, int. dim. 2230 x 3630 & 2230 x 2030 xh 2230 mm (18,05 + 10,09 m³)

    Diamond Combi cold rooms ISO 100, int. dim. 2230 x 3630 & 2230 x 2030 xh 2230 mm (18,05 + 10,09 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2230x3630xh2230 mm (internal volume 18,05m³). Freezer area (also interchangeable with fridge): internal dimensions 2230x2030xh2230 mm (internal volume 10,09m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2430 x 5960 x 2430 Category: Diamond Range: Refrigeration Subfamily: 17,57 + 10,19 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 2430 mm Width: 5960 mm Height: 2430 mm Weight: 1160 kg Technical

    In stock

    131.882,00 kr
    excl. VAT 164.852,50 kr incl.

  • Combi cold room ISO 100, int. dim. 2830 x 2630 & 2830 x 1830 xh 2230 mm (16,6 + 11,55 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 2630 & 2830 x 1830 xh 2230 mm (16,6 + 11,55 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x2630xh2230 mm (internal volume 16,60m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x1830xh2230 mm (internal volume 11,55m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 3030 x 4760 x 2430 Category: Diamond Range: Refrigeration Subfamily: 16,83 + 11,15 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 4760 mm Height: 2430 mm Weight: 1130 kg Technical

    In stock

    136.292,00 kr
    excl. VAT 170.365,00 kr incl.

  • Combi cold room ISO 100, int. dim. 2230 x 3230 & 2230 x 1830 xh 2230 mm (16,06 + 9,1 m³)

    Diamond Combi cold room ISO 100, int. dim. 2230 x 3230 & 2230 x 1830 xh 2230 mm (16,06 + 9,1 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2230x3230xh2230 mm (internal volume 16,06m³). Freezer area (also interchangeable with fridge): internal dimensions 2230x1830xh2230 mm (internal volume 9,10m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2430 x 5360 x 2430 Category: Diamond Range: Refrigeration Subfamily: 16,09 + 8,71 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 2430 mm Width: 5360 mm Height: 2430 mm Weight: 1100 kg Technical

    In stock

    125.304,00 kr
    excl. VAT 156.630,00 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond Assembly Cold Room T° -5° +15° Consists Of:This assembly features a cold room with a temperature range of -5° to +15°C and is designed for refrigeration units in commercial kitchens.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 2,27 Vol/M3/ T°-5° +5° /WHITE Line: MINICOLD ISO 80 PLUS

    In stock

    52.212,00 kr
    excl. VAT 65.265,00 kr incl.

  • Room ISO 100, int. dim. 1230 x 1030 xh 2030 mm (2,57 m³)

    Diamond Room ISO 100, int. dim. 1230 x 1030 xh 2030 mm (2,57 m³)

    In stock

    Internal dimensions: 1230x1030xh2030 mm. Internal volume 2,57 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1430 x 1230 x 2230 Category: Diamond Range: Refrigeration Subfamily: 2,27 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 1430 mm Width: 1230 mm Height: 2230 mm Weight: 270 kg Technical

    In stock

    34.257,00 kr
    excl. VAT 42.821,25 kr incl.

  • Room ISO 80, int. dim. 1230 x 1030 xh 2030 mm (2,57 m³)

    Diamond Room ISO 80, int. dim. 1230 x 1030 xh 2030 mm (2,57 m³)

    In stock

    Internal dimensions: 1230x1030xh2030 mm. Internal volume 2,57 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1390 x 1190 x 2190 Category: Diamond Range: Refrigeration Subfamily: 2,27 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1390 mm Width: 1190 mm Height: 2190 mm Weight: 210 kg Technical

    In stock

    30.931,00 kr
    excl. VAT 38.663,75 kr incl.


You have seen 192 out of 208 products

Kølerum – pålidelig opbevaring til storskala Køl & Frys

Kølerum giver den ultimative løsning til bulk Køl & Frys og temperaturstyret opbevaring i professionelle miljøer. Designet til restauranter, hoteller, supermarkeder og cateringfaciliteter, sikrer de ensartet køling og optimal bevaring af letfordærvelige varer.

Hos Maxigastro, vores modulopbyggede kølerum er bygget til effektivitet, holdbarhed og hygiejne. Hver enhed har isolerede paneler, sikre døre, kraftfulde kølesystemer og præcis digital temperaturkontrol- Hold dine produkter sikkert opbevaret under stabile forhold.

Tilgængelig i forskellige størrelser og temperaturområder, kan vores kølerum tilpasses, så de opfylder dine specifikke krav til plads og kapacitet. Med nem installation og energieffektiv ydeevne leverer de pålidelig køling til ethvert professionelt køkken eller opbevaringsområde.

© 2026 Maxigastro, Made By MXGDEV

    • American Express
    • Apple Pay
    • Bancontact
    • BLIK
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account