kølerum

208 products

Show previous products

  • Room ISO 80, int. dim. 2630 x 1830 xh 2030 mm (9,77 m³)

    Diamond Room ISO 80, int. dim. 2630 x 1830 xh 2030 mm (9,77 m³)

    In stock

    Internal dimensions: 2630x1830xh2030 mm. Internal volume 9,77 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2790 x 1990 x 2190 Category: Diamond Range: Refrigeration Subfamily: 9,83 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 2790 mm Width: 1990 mm Height: 2190 mm Weight: 520 kg Technical

    Read more

    In stock

    59.631,00 kr
    excl. VAT 74.538,75 kr incl.

  • Room ISO 80, int. dim. 2030 x 2030 xh 2030 mm (8,37 m³)

    Diamond Room ISO 80, int. dim. 2030 x 2030 xh 2030 mm (8,37 m³)

    In stock

    Internal dimensions: 2030x2030xh2030 mm. Internal volume 8,37m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2190 x 2190 x 2190 Category: Diamond Range: Refrigeration Subfamily: 8,93 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 2190 mm Width: 2190 mm Height: 2190 mm Weight: 430 kg Technical

    Read more

    In stock

    52.396,00 kr
    excl. VAT 65.495,00 kr incl.

  • Room ISO 80, int. dim. 2430 x 1830 xh 2030 mm (9,03 m³)

    Diamond Room ISO 80, int. dim. 2430 x 1830 xh 2030 mm (9,03 m³)

    In stock

    Internal dimensions: 2430x1830xh2030 mm. Internal volume 9,03m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2590 x 1990 x 2190 Category: Diamond Range: Refrigeration Subfamily: 8,75 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 2590 mm Width: 1990 mm Height: 2190 mm Weight: 450 kg Technical

    Read more

    In stock

    55.356,00 kr
    excl. VAT 69.195,00 kr incl.

  • Room ISO 100, int. dim. 2030 x 2030 xh 2030 mm (8,37 m³)

    Diamond Room ISO 100, int. dim. 2030 x 2030 xh 2030 mm (8,37 m³)

    In stock

    Internal dimensions: 2030x2030xh2030 mm. Internal volume 8,37m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2230 x 2230 x 2230 Category: Diamond Range: Refrigeration Subfamily: 8,93 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2230 mm Width: 2230 mm Height: 2230 mm Weight: 480 kg Technical

    Read more

    In stock

    56.245,00 kr
    excl. VAT 70.306,25 kr incl.

  • Room ISO 100, int. dim. 2430 x 1830 xh 2030 mm (9,03 m³)

    Diamond Room ISO 100, int. dim. 2430 x 1830 xh 2030 mm (9,03 m³)

    In stock

    Internal dimensions: 2430x1830xh2030 mm. Internal volume 9,03m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2630 x 2030 x 2230 Category: Diamond Range: Refrigeration Subfamily: 8,75 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2630 mm Width: 2030 mm Height: 2230 mm Weight: 530 kg Technical

    Read more

    In stock

    59.290,00 kr
    excl. VAT 74.112,50 kr incl.

  • Room ISO 100, int. dim. 2030 x 1830 xh 2030 mm (7,54 m³)

    Diamond Room ISO 100, int. dim. 2030 x 1830 xh 2030 mm (7,54 m³)

    In stock

    Internal dimensions: 2030x1830xh2030 mm. Internal volume 7,54m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2230 x 2030 x 2230 Category: Diamond Range: Refrigeration Subfamily: 7,68 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2230 mm Width: 2030 mm Height: 2230 mm Weight: 480 kg Technical

    Read more

    In stock

    55.209,00 kr
    excl. VAT 69.011,25 kr incl.

  • Room ISO 80, int. dim. 2030 x 1830 xh 2030 mm (7,54 m³)

    Diamond Room ISO 80, int. dim. 2030 x 1830 xh 2030 mm (7,54 m³)

    In stock

    Internal dimensions: 2030x1830xh2030 mm. Internal volume 7,54m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2190 x 1990 x 2190 Category: Diamond Range: Refrigeration Subfamily: 7,68 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 2190 mm Width: 1990 mm Height: 2190 mm Weight: 410 kg Technical

    Read more

    In stock

    51.446,00 kr
    excl. VAT 64.307,50 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond's Assembly cold room T° -5° +15° consists of a reliable and efficient solution for commercial kitchens. Constructed from high-quality materials, this product offers excellent durability and reliability. Its advanced design allows for precise temperature control, ensuring optimal storage conditions for chilled goods. Perfect for restaurants, hotels, and professional kitchens, this product is designed to meet the demands of heavy use.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 6,43 Vol/M3 / T°-5° +5° / WHITE Line: MINICOLD ISO 80 PLUS

    Read more

    In stock

    71.594,00 kr
    excl. VAT 89.492,50 kr incl.

  • Room ISO 80, int. dim. 2230 x 1430 xh 2030 mm (6,47 m³)

    Diamond Room ISO 80, int. dim. 2230 x 1430 xh 2030 mm (6,47 m³)

    In stock

    Internal dimensions: 2230x1430xh2030 mm. Internal volume 6,47 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2390 x 1590 x 2190 Category: Diamond Range: Refrigeration Subfamily: 6,43 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 2390 mm Width: 1590 mm Height: 2190 mm Weight: 390 kg Technical

    Read more

    In stock

    48.886,00 kr
    excl. VAT 61.107,50 kr incl.

  • Room ISO 100, int. dim. 2230 x 1430 xh 2030 mm (6,47 m³)

    Diamond Room ISO 100, int. dim. 2230 x 1430 xh 2030 mm (6,47 m³)

    In stock

    Internal dimensions: 2230x1430xh2030 mm. Internal volume 6,47 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2430 x 1630 x 2230 Category: Diamond Range: Refrigeration Subfamily: 6,43 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2430 mm Width: 1630 mm Height: 2230 mm Weight: 455 kg Technical

    Read more

    In stock

    52.261,00 kr
    excl. VAT 65.326,25 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond's Assembly cold room T° -5° +15° consists of a reliable and efficient solution for commercial kitchens. Constructed from high-quality materials, this product offers excellent durability and reliability. Its advanced design allows for precise temperature control, ensuring optimal storage conditions for chilled goods. Perfect for restaurants, hotels, and professional kitchens, this product is designed to meet the demands of heavy use.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 6,31 Vol/M3 / T°-5° +5° / WHITE Line: MINICOLD ISO 80 PLUS

    Read more

    In stock

    71.472,00 kr
    excl. VAT 89.340,00 kr incl.

  • Room ISO 80, int. dim. 1830 x 1830 xh 2030 mm (6,8 m³)

    Diamond Room ISO 80, int. dim. 1830 x 1830 xh 2030 mm (6,8 m³)

    In stock

    Internal dimensions: 1830x1830xh2030 mm. Internal volume 6,80 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1990 x 1990 x 2190 Category: Diamond Range: Refrigeration Subfamily: 6,31 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1990 mm Width: 1990 mm Height: 2190 mm Weight: 390 kg Technical

    Read more

    In stock

    48.765,00 kr
    excl. VAT 60.956,25 kr incl.

  • Room ISO 80, int. dim. 1830 x 1430 xh 2030 mm (5,31 m³)

    Diamond Room ISO 80, int. dim. 1830 x 1430 xh 2030 mm (5,31 m³)

    In stock

    Internal dimensions: 1830x1430xh2030 mm. Internal volume 5,31 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1990 x 1590 x 2190 Category: Diamond Range: Refrigeration Subfamily: 5,53 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1990 mm Width: 1590 mm Height: 2190 mm Weight: 350 kg Technical

    Read more

    In stock

    45.671,00 kr
    excl. VAT 57.088,75 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond's Assembly cold room T° -5° +15° consists of a reliable and efficient solution for commercial kitchens. Constructed from high-quality materials, this product offers excellent durability and reliability. Its advanced design allows for precise temperature control, ensuring optimal storage conditions for chilled goods. Perfect for restaurants, hotels, and professional kitchens, this product is designed to meet the demands of heavy use.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 5,53 Vol/M3/T°-5° +5°/WHITE Line: MINICOLD ISO 80 PLUS

    Read more

    In stock

    68.378,00 kr
    excl. VAT 85.472,50 kr incl.

  • Room ISO 100, int. dim. 1830 x 1830 xh 2030 mm (6,8 m³)

    Diamond Room ISO 100, int. dim. 1830 x 1830 xh 2030 mm (6,8 m³)

    In stock

    Internal dimensions: 1830x1830xh2030 mm. Internal volume 6,80 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2030 x 2030 x 2230 Category: Diamond Range: Refrigeration Subfamily: 6,31 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2030 mm Width: 2030 mm Height: 2230 mm Weight: 450 kg Technical

    Read more

    In stock

    52.335,00 kr
    excl. VAT 65.418,75 kr incl.

  • Room ISO 100, int. dim. 1830 x 1430 xh 2030 mm (5,31 m³)

    Diamond Room ISO 100, int. dim. 1830 x 1430 xh 2030 mm (5,31 m³)

    In stock

    Internal dimensions: 1830x1430xh2030 mm. Internal volume 5,31 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2030 x 1630 x 2230 Category: Diamond Range: Refrigeration Subfamily: 5,53 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2030 mm Width: 1630 mm Height: 2230 mm Weight: 410 kg Technical

    Read more

    In stock

    48.886,00 kr
    excl. VAT 61.107,50 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond's Assembly cold room T° -5° +15° consists of a reliable and efficient solution for commercial kitchens. Constructed from high-quality materials, this product offers excellent durability and reliability. Its advanced design allows for precise temperature control, ensuring optimal storage conditions for chilled goods. Perfect for restaurants, hotels, and professional kitchens, this product is designed to meet the demands of heavy use.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 5,17 Vol/M3/T°-5° +5°/WHITE Line: MINICOLD ISO 80 PLUS

    Read more

    In stock

    65.844,00 kr
    excl. VAT 82.305,00 kr incl.

  • Room ISO 100, int. dim. 2030 x 1230 xh 2030 mm (5,07 m³)

    Diamond Room ISO 100, int. dim. 2030 x 1230 xh 2030 mm (5,07 m³)

    In stock

    Internal dimensions: 2030x1230xh2030 mm. Internal volume 5,07 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2230 x 1430 x 2230 Category: Diamond Range: Refrigeration Subfamily: 5,17 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 2230 mm Width: 1430 mm Height: 2230 mm Weight: 370 kg Technical

    Read more

    In stock

    47.766,00 kr
    excl. VAT 59.707,50 kr incl.

  • Room ISO 80, int. dim. 2030 x 1230 xh 2030 mm (5,07 m³)

    Diamond Room ISO 80, int. dim. 2030 x 1230 xh 2030 mm (5,07 m³)

    In stock

    Internal dimensions: 2030x1230xh2030 mm. Internal volume 5,07 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2190 x 1390 x 2190 Category: Diamond Range: Refrigeration Subfamily: 5,17 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 2190 mm Width: 1390 mm Height: 2190 mm Weight: 340 kg Technical

    Read more

    In stock

    44.563,00 kr
    excl. VAT 55.703,75 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    Diamond's Assembly cold room T° -5° +15° consists of a reliable and efficient solution for commercial kitchens. Constructed from high-quality materials, this product offers excellent durability and reliability. Its advanced design allows for precise temperature control, ensuring optimal storage conditions for chilled goods. Perfect for restaurants, hotels, and professional kitchens, this product is designed to meet the demands of heavy use.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 4,62 Vol/M3 /T°-5° +5°/WHITE Line: MINICOLD ISO 80 PLUS

    Read more

    In stock

    64.602,00 kr
    excl. VAT 80.752,50 kr incl.

  • Room ISO 80, int. dim. 1630 x 1430 xh 2030 mm (4,73 m³)

    Diamond Room ISO 80, int. dim. 1630 x 1430 xh 2030 mm (4,73 m³)

    In stock

    Internal dimensions: 1630x1430xh2030 mm. Internal volume 4,73 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1790 x 1590 x 2190 Category: Diamond Range: Refrigeration Subfamily: 4,62 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1790 mm Width: 1590 mm Height: 2190 mm Weight: 330 kg Technical

    Read more

    In stock

    43.319,00 kr
    excl. VAT 54.148,75 kr incl.

  • Room ISO 100, int. dim. 1630 x 1430 xh 2030 mm (4,73 m³)

    Diamond Room ISO 100, int. dim. 1630 x 1430 xh 2030 mm (4,73 m³)

    In stock

    Internal dimensions: 1630x1430xh2030 mm. Internal volume 4,73 m³. Door with useful passage 800xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1830 x 1630 x 2230 Category: Diamond Range: Refrigeration Subfamily: 4,62 Vol/M3 / WHITE Line: MINICOLD 100 EVO Length: 1830 mm Width: 1630 mm Height: 2230 mm Weight: 360 kg Technical

    Read more

    In stock

    46.170,00 kr
    excl. VAT 57.712,50 kr incl.

  • Assembly cold room T° -5° +15° consists of :

    Diamond Assembly cold room T° -5° +15° consists of :

    In stock

    The Diamond Assembly cold room is designed to provide precise temperature control in commercial kitchens. With its advanced technology and durable construction, this system ensures reliable performance and accurate readings.Technical specificationsTechnical Specification Category: Diamond Range: Refrigeration Subfamily: 4,45 Vol/M3 /T°-5° +5°/WHITE Line: MINICOLD ISO 80 PLUS

    Read more

    In stock

    64.297,00 kr
    excl. VAT 80.371,25 kr incl.

  • Room ISO 80, int. dim. 1830 x 1230 xh 2030 mm (4,57 m³)

    Diamond Room ISO 80, int. dim. 1830 x 1230 xh 2030 mm (4,57 m³)

    In stock

    Internal dimensions: 1830x1230xh2030 mm. Internal volume 4,57 m³. Door with useful passage 700xh1900 mm (choice of door positioning on 4 sides). Door seal fitted with a peripheral heating cord (for negative T°). Vacuum valve (for negative T°). Multipurpose chamber for positive or negative temperature, wall, floor and ceiling thickness 80mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 80 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Panel certified to classification B-S3,d0 in accordance with UNI EN 13501-1:2009. Equipment built in compliance with current EC standards. PLUS : Minicold EVO, a brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 1990 x 1390 x 2190 Category: Diamond Range: Refrigeration Subfamily: 4,45 Vol/M3 / WHITE Line: MINICOLD 80 EVO Length: 1990 mm Width: 1390 mm Height: 2190 mm Weight: 320 kg Technical

    Read more

    In stock

    43.003,00 kr
    excl. VAT 53.753,75 kr incl.

You have seen 168 out of 208 products

Show more products

Kølerum – pålidelig opbevaring til storskala Køl & Frys

Kølerum giver den ultimative løsning til bulk Køl & Frys og temperaturstyret opbevaring i professionelle miljøer. Designet til restauranter, hoteller, supermarkeder og cateringfaciliteter, sikrer de ensartet køling og optimal bevaring af letfordærvelige varer.

Hos Maxigastro, vores modulopbyggede kølerum er bygget til effektivitet, holdbarhed og hygiejne. Hver enhed har isolerede paneler, sikre døre, kraftfulde kølesystemer og præcis digital temperaturkontrol- Hold dine produkter sikkert opbevaret under stabile forhold.

Tilgængelig i forskellige størrelser og temperaturområder, kan vores kølerum tilpasses, så de opfylder dine specifikke krav til plads og kapacitet. Med nem installation og energieffektiv ydeevne leverer de pålidelig køling til ethvert professionelt køkken eller opbevaringsområde.

© 2026 Maxigastro, Made By MXGDEV

    • American Express
    • Apple Pay
    • Bancontact
    • BLIK
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account