Diamond Professionelt køkkenudstyr – kraft, præcision og ydeevne

6254 products

  • Combi cold room ISO 100 int. dim. 2230 x 2630 & 2230 x 1830 xh 2230 mm (13,08 + 9,1m³)

    Diamond Combi cold room ISO 100 int. dim. 2230 x 2630 & 2230 x 1830 xh 2230 mm (13,08 + 9,1m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2230x2630xh2230 mm (internal volume 13,08m³). Freezer area (also interchangeable with fridge): internal dimensions 2230x1830xh2230 mm (internal volume 9,10m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2430 x 4760 x 2430 Category: Diamond Range: Refrigeration Subfamily: 13,14 + 8,71 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 2430 mm Width: 4760 mm Height: 2430 mm Weight: 960 kg Technical

    In stock

    €9.497,10
    excl. VAT €11.491,49 incl.

  • Combi cold room ISO 100 int. dim. 2830 x 1430 & 2830 x 1230 xh 2230 mm (9,02 + 7,76 m³)

    Diamond Combi cold room ISO 100 int. dim. 2830 x 1430 & 2830 x 1230 xh 2230 mm (9,02 + 7,76 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x1430xh2230 mm (internal volume 9.02m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x1230xh2230 mm (internal volume 7.76m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). All new manufacturing design, equipped with peripheral angular and linear joint panels, more ease of assembly and possibility of extension at any time, impeccable level of finish. The angles and corners are all rounded, without any mouldings, a hygiene assured has 100%!Floor covered with a phenolic anti-slip resin "honeycomb". Peripheral frame of the door in anodized aluminum, better protection (transit carts, ladders with plates, etc ...) Pre-assembly kit of the panels delivered as standard, including ceiling support, making it safer, easier and faster ..... On request: modular shelves, strip curtain, cart ramp (exterior and interior), etc. .... Technical Specification mm (W x D x H) : 3030 x 2960 x 2430 Category: Diamond Range: Refrigeration Subfamily: 9,26 + 7,37 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 2960 mm Height: 2430 mm Weight: 820 kg Technical

    In stock

    €8.876,00
    excl. VAT €10.739,96 incl.

  • Combi cold room ISO 100, int. dim. 2230 x 3230 & 2230 x 1830 xh 2230 mm (16,06 + 9,1 m³)

    Diamond Combi cold room ISO 100, int. dim. 2230 x 3230 & 2230 x 1830 xh 2230 mm (16,06 + 9,1 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2230x3230xh2230 mm (internal volume 16,06m³). Freezer area (also interchangeable with fridge): internal dimensions 2230x1830xh2230 mm (internal volume 9,10m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2430 x 5360 x 2430 Category: Diamond Range: Refrigeration Subfamily: 16,09 + 8,71 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 2430 mm Width: 5360 mm Height: 2430 mm Weight: 1100 kg Technical

    In stock

    €9.905,40
    excl. VAT €11.985,53 incl.

  • Combi cold room ISO 100, int. dim. 2830 x 2030 & 2830 x 1230 xh 2230 mm (12,81 + 7,76 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 2030 & 2830 x 1230 xh 2230 mm (12,81 + 7,76 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x2030xh2230 mm (internal volume 12,81m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x1230xh2230 mm (internal volume 7,76m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 3030 x 3560 x 2430 Category: Diamond Range: Refrigeration Subfamily: 13,05 + 7,37 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 3560 mm Height: 2430 mm Weight: 980 kg Technical

    In stock

    €9.386,40
    excl. VAT €11.357,54 incl.

  • Combi cold room ISO 100, int. dim. 2830 x 2630 & 2830 x 1230 xh 2230 mm (16,6 + 7,76 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 2630 & 2830 x 1230 xh 2230 mm (16,6 + 7,76 m³)

    In stock

    Fridge zone (interchangeable also in freezer) : Internal dimensions 2830 x 2630 xh 2230 mm (Internal volume 16,6 m³). Freezer area (also interchangeable with fridge): Internal dimensions 2830 x 1230 xh 2230 mm (Internal volume 7,76 m³) 2 doors with a usable passage of 900 x 1900 mm (external door can be positioned on all 3 sides) Door seals equipped with a peripheral heating cord (for negative T°) 2 vacuum valves (for negative temperature). Specific chamber with 2 zones for negative (or positive) temperature, thickness of walls, floor and ceiling of 100 mm, modulation with panels of width 200 to 1200 mm (200+200+200 ...). Panels made of white lacquered galvanized steel sheet "non-toxic and anti-scratch. Insulation in high density injected polyurethane (43 Kg/m3), ecological (without CFC). Locking of the panels by incorporated "eccentric" hooks. Reinforced floor made of 12 mm multiplex wood, covered with a phenolic anti-slip "honeycomb" resin, supporting a load of 4000 kg/m² (140 Kg point load). 90° peripheral angles with specific caps at the ends, also insulated with polyurethane (50 Kg/m3) to avoid any possible thermal bridge. Separation panel with internal door, fixed on "T" shaped corners, also insulated with polyurethane (50 Kg/m3) to avoid any possible thermal bridge. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50 Kg/m3). Swinging door thickness 100 mm also insulated with polyurethane (43 Kg/m3), with right hinges (on request, possibility of left hinges: CGC/BF), very robust, reinforced with a peripheral frame in anodized aluminum, provided with a magnetic seal in EPDM "pressure" (easy replacement, without tools), adjustable rising hinges and with stop at 100°, external handle with key lock, internal closing with safety device. Equipment built in compliance with the normative (CE) in force. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). All new manufacturing design, equipped with peripheral angular and linear joint panels, more ease of assembly and possibility of extension at any time, impeccable level of finish. The angles and corners are all rounded, without any mouldings, a hygiene assured has 100%!Floor covered with a phenolic anti-slip resin "honeycomb". Peripheral frame of the door in anodized aluminum, better protection (transit carts, ladders with plates, etc ...) Pre-assembly kit of the panels delivered as standard, including ceiling support, making it safer, easier and faster ..... On request: modular shelves, strip curtain, cart ramp (exterior and interior), etc. .... Technical Specification mm (W x D x H) : 3030 x 4160 x 2430 Category: Diamond Range: Refrigeration Subfamily: 16,83 + 7,37 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 4160 mm Height: 2430 mm Weight: 1070 kg Technical

    In stock

    €10.099,90
    excl. VAT €12.220,88 incl.

  • Combi cold room ISO 100, int. dim. 2830 x 2630 & 2830 x 1830 xh 2230 mm (16,6 + 11,55 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 2630 & 2830 x 1830 xh 2230 mm (16,6 + 11,55 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x2630xh2230 mm (internal volume 16,60m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x1830xh2230 mm (internal volume 11,55m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 3030 x 4760 x 2430 Category: Diamond Range: Refrigeration Subfamily: 16,83 + 11,15 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 4760 mm Height: 2430 mm Weight: 1130 kg Technical

    In stock

    €10.774,00
    excl. VAT €13.036,54 incl.

  • Combi cold room ISO 100, int. dim. 2830 x 3230 & 2830 x 1830 xh 2230 mm (20,38 + 11,55 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 3230 & 2830 x 1830 xh 2230 mm (20,38 + 11,55 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x3230xh2230 mm (internal volume 20,38m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x1830xh2230 mm (internal volume 11,55m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 3030 x 5360 x 2430 Category: Diamond Range: Refrigeration Subfamily: 20,61 + 11,15 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 5360 mm Height: 2430 mm Weight: 1280 kg Technical

    In stock

    €11.069,70
    excl. VAT €13.394,34 incl.

  • Combi cold room ISO 100, int. dim. 2830 x 3630 & 2830 x 2030 xh 2230 mm (22,91 + 12,81 m³)

    Diamond Combi cold room ISO 100, int. dim. 2830 x 3630 & 2830 x 2030 xh 2230 mm (22,91 + 12,81 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2830x3630xh2230 mm (internal volume 22,91m³). Freezer area (also interchangeable with fridge): internal dimensions 2830x2030xh2230 mm (internal volume 12,81m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 3030 x 5960 x 2430 Category: Diamond Range: Refrigeration Subfamily: 22,5 + 13,5 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 3030 mm Width: 5960 mm Height: 2430 mm Weight: 1370 kg Technical

    In stock

    €11.661,90
    excl. VAT €14.110,90 incl.

  • Combi cold rooms ISO 100, int. dim. 2230 x 3630 & 2230 x 2030 xh 2230 mm (18,05 + 10,09 m³)

    Diamond Combi cold rooms ISO 100, int. dim. 2230 x 3630 & 2230 x 2030 xh 2230 mm (18,05 + 10,09 m³)

    In stock

    Fridge area (also interchangeable with freezer): internal dimensions 2230x3630xh2230 mm (internal volume 18,05m³). Freezer area (also interchangeable with fridge): internal dimensions 2230x2030xh2230 mm (internal volume 10,09m³). 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides). Door seal fitted with peripheral heating cord (for negative T°). 2 vacuum valves (for negative T°). Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc). Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel. High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free). Panels locked by built-in ‘eccentric’ hooks. Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load). Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging. The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3). 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device. Equipment built in compliance with current EC standards. PLUS : Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge). A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish. The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed. Floor covered in non-slip phenolic ‘honeycomb’ resin. All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc). Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker. On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc. Technical Specification mm (W x D x H) : 2430 x 5960 x 2430 Category: Diamond Range: Refrigeration Subfamily: 17,57 + 10,19 Vol/M3 / WHITE Line: MAXICOLD 100 EVO Length: 2430 mm Width: 5960 mm Height: 2430 mm Weight: 1160 kg Technical

    In stock

    €10.425,40
    excl. VAT €12.614,73 incl.

  • Combinated dough crusher and moulder "multifunction" Combinated dough crusher and moulder "multifunction"

    Diamond Combinated dough crusher and moulder "multifunction"

    In stock

    Technical Specification mm (W x D x H) : 400 x 520 x 630 - kW (elec) : 0.9 - Voltage : 400/3N 50Hz Category: Diamond Range: Pizza - Pasta Subfamily: ELECTRIC Line: SHEETER LINE Length: 400 mm Width: 520 mm Height: 630 mm Electric Power: 0.9 kW Voltage: 400/3N 50Hz Weight: 62 kg

    In stock

    €8.427,60
    excl. VAT €10.197,40 incl.

  • Combinated dough crusher and moulder "multifunction"

    Diamond Combinated dough crusher and moulder "multifunction"

    In stock

    The Diamond Combinated Dough Crusher and Moulder is a high-quality component designed for pizza and pasta applications. Featuring a durable construction and easy-to-clean design, this unit provides precise crushing and moulding capabilities.With its compact size and lightweight design, the Diamond Combinated Dough Crusher and Moulder is an ideal addition to any commercial kitchen layout.Technical specificationsTechnical Specification mm (W x D x H) : 400 x 520 x 630 - kW (elec) : 0.9 - Voltage : 400/3N 50Hz Category: Diamond Range: Pizza - Pasta Subfamily: ELECTRIC Line: SHEETER LINE Length: 400 mm Width: 520 mm Height: 630 mm Electric Power: 0.9 kW Voltage: 400/3N 50Hz Weight: 62 kg

    In stock

    €7.548,00
    excl. VAT €9.133,08 incl.

  • Combinated dough moulder "multifunction"

    Diamond Combinated dough moulder "multifunction"

    In stock

    Streamline your dough preparation with Diamond's combined dough moulder 'multifunction'. Featuring a stainless steel construction, this moulder offers efficient and precise performance. Perfect for bakeries or restaurants, its compact design makes it ideal for small spaces.Technical specificationsTechnical Specification mm (W x D x H) : 360 x 400 x 320 - kW (elec) : 0.75 - Voltage : 400/3N 50Hz Category: Diamond Range: Pizza - Pasta Subfamily: ELECTRIC Line: SHEETER LINE Length: 360 mm Width: 400 mm Height: 320 mm Electric Power: 0.75 kW Voltage: 400/3N 50Hz Weight: 35 kg

    In stock

    €5.263,80
    excl. VAT €6.369,20 incl.

  • Combinated handwash on support

    Diamond Combinated handwash on support

    In stock

    The Diamond Combinated Handwash on Support is a premium solution for commercial kitchens, designed to provide a hygienic and efficient hand-washing experience. Featuring a monobloc stamped splashback and cold and warm water mixing tap, this sink ensures optimal cleanliness and convenience.With its knee-operated design and swan-neck tap, the Diamond Combinated Handwash on Support is perfect for busy kitchens where space is limited. Its durable construction and easy-to-clean design make it an excellent choice for restaurants, hotels, and other foodservice establishments.Technical specificationsTechnical Specification mm (W x D x H) : 500 x 700 x 620/870 Category: Diamond Range: S.S. Furniture - Hygiene Subfamily: 700 mm Line: STANDARD LINE Length: 500 mm Width: 700 mm Height: 620/870 mm Weight: 21 kg

    In stock

    €725,40
    excl. VAT €877,73 incl.

  • Commercial Gravity-feed Slicer, Ø 350 mm

    Diamond Commercial Gravity-feed Slicer, Ø 350 mm

    Diamond's Commercial Gravity-feed Slicer, Ø 350 mm is a high-quality slicing solution designed for professional kitchens. Made from durable anodized aluminum and stainless steel, this slicer features a compact design and lightweight construction.Key benefits include: Durable anodized aluminum construction Compact design for easy maneuverability Technical specifications Gravity-feed, 38° inclination (a blade extractor comes standard). Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness: 0-30 mm. 50 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe). Reinforced gauge plate, removable slider guard. Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard. End weight conceived for all shapes, even the smallest. Stainless steel screws (not visible) and deflector. Fan-cooled motor. Bottom enclosure panel. Transmission pulley protected with a retaining ring. Low voltage controls 24 V, IP 54 protection rating, waterproof buttons, NVR (No-Voltage Release) preventing any unintentional starts. Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray. Adjustable feet. Machine complying with the current CE standards. Important: easy and safe cleaning thanks to:1°) Rounded design, no sharp edges and visible screws.2°) Wide gap between blade and body.3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".4°) Removable blade guard.5°) Permanent tapered blade ring guard.Info: all TOP Line slicers come with Bordeau knobs and handles! Technical Specification mm (W x D x H) : 575 x 615 x 530 - kW (elec) : 0.28 Category: Diamond Range: Dynamic Preparation Line: TOP LINE Length: 575 mm Width: 615 mm Height: 530 mm Electric Power: 0.28 kW Weight: 42 kg

    €1.876,90
    excl. VAT €2.271,05 incl.

  • Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears" Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears"

    Diamond Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears"

    In stock

    Gear drive system with "worm screw" in oil bath, "self-lubricating". Oblique blade, 35° inclination (standard blade extractor); Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness 0-30 mm. 50 mm gap between blade and body.   Elegant and efficient, made of anodized and polished aluminium alloy melting. Hardened, chrome-plated and rectified steel blade, fixed protection ring and blade cover with microswitch (100% safe). Reinforced stop, protection of the stop slide, removable. Carriage on stainless steel ball bearings, easy and silent sliding, chrome-plated, rectified and polished sliding bar, vulcanized rubber bumper, Plexiglas protection as standard. Heel pushers for all products_backup_1_1 (even the smallest). Stainless steel screws (not visible) and deflector. Ventilated motor, lower electrical parts with protective cover, sealing ring on the transmission pulley. Low-voltage 24 V controls, IP 54 protection class, waterproof keys, NVR (No-Voltage Release) to prevent unintentional starting. Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray. Adjustable cylinders. Unit built in compliance with current (CE) standards. Important: easy and safe cleaning thanks to:1°) Rounded design, no sharp edges and visible screws.2°) Wide gap between blade and body.3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".4°) Removable blade guard.5°) Permanent tapered blade ring guard.Info: all TOP Line slicers come with Bordeau knobs and handles!  Technical Specification mm (W x D x H) : 575 x 575 x 530 - kW (elec) : 0.4 Category: Diamond Range: Dynamic Preparation Subrange: Slicers Family: Lame diam. 350 mm Subfamily: TRANSMITION GEARS Line: TOP LINE Length: 575 mm Width: 575 mm Height: 530 mm Electric Power: 0.4 kW Weight: 43 kg Restock Info: Contact Supplier Delivery Delay: 35 Availability: 8

    In stock

    €2.699,00
    excl. VAT €3.265,79 incl.

  • Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears" STONEHENGE PLUS Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears" STONEHENGE PLUS

    Diamond Commercial Gravity-feed Slicer, Ø 350 mm (14") "gears" STONEHENGE PLUS

    In stock

    Completely coated with a special ceramic treatment. Gear drive system with "worm screw" in oil bath, "self-lubricating". Oblique blade, 35° inclination (standard blade extractor); Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-30 mm. 50 mm space between blade and chassis.   Elegant and high-performing, made from anodized and polished aluminum alloy casting. Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure). Reinforced stop, removable stop slide protection. Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection. Pusher for all products (even the smallest ones). Invisible screws and stainless steel deflector. Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley. 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups. Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray. Adjustable jacks. Device built in compliance with current CE standards. Important: easy and safe maintenance thanks to: its design with rounded shapes without corners, sharp edges or visible screws; wide space between blade and chassis; "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0"; removable blade cover; protection ring fixed around the blade. ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.Technical Specification mm (W x D x H) : 575 x 575 x 530 - kW (elec) : 0.4 Category: Diamond Range: Dynamic Preparation Subrange: Slicers Family: Lame diam. 350 mm Subfamily: TRANSMITION GEARS Line: TOP LINE Length: 575 mm Width: 575 mm Height: 530 mm Electric Power: 0.4 kW Weight: 43 kg Restock Info: Contact Supplier Delivery Delay: 35 Availability: 0

    In stock

    €3.264,00
    excl. VAT €3.949,44 incl.

  • Commercial Gravity-feed Slicer, Ø 350 mm STONEHENGE PLUS Commercial Gravity-feed Slicer, Ø 350 mm STONEHENGE PLUS

    Diamond Commercial Gravity-feed Slicer, Ø 350 mm STONEHENGE PLUS

    In stock

    Completely coated with a special ceramic treatment. Oblique blade, 35° inclination (standard blade extractor). Max cutting capacity: 270xh230 mm (Ø 255 mm), thickness 0-23 mm. 50 mm space between blade and chassis.   Elegant and high-performing, made from anodized and polished aluminum alloy casting. Hardened steel blade, chromed and ground, fixed protection ring and blade cover with micro-switch (100% secure). Reinforced stop, removable stop slide protection. Stainless steel ball-bearing carriage, smooth and silent sliding, chromed, ground and polished sliding bar, vulcanized rubber bumper, standard plexiglass protection. Pusher for all products (even the smallest ones). Invisible screws and stainless steel deflector. Ventilated motor, lower electrical parts equipped with a protective cover, sealing ring on the transmission pulley. 24V low voltage controls, IP67 protection rating, waterproof buttons, NVR (No-Voltage Release) to prevent accidental start-ups. Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray. Adjustable jacks. Device built in compliance with current CE standards. Important: easy and safe maintenance thanks to: its design with rounded shapes without corners, sharp edges or visible screws; wide space between blade and chassis; "secure detachment" system, allowing the carriage to be removed, with the blade secured by the stop, in position "0"; removable blade cover; protection ring fixed around the blade. ADVANTAGE : The ceramic coating is ideal for cutting particularly sticky products. It is easy to clean (IP 67) and highly resistant to acids and disinfecting chemicals. Additionally, the removable parts are dishwasher safe.Technical Specification mm (W x D x H) : 575 x 615 x 530 - kW (elec) : 0.28 Category: Diamond Range: Dynamic Preparation Subrange: Slicers Family: Lame diam. 350 mm Line: TOP LINE Length: 575 mm Width: 615 mm Height: 530 mm Electric Power: 0.28 kW Weight: 42 kg Restock Info: Contact Supplier Delivery Delay: 35 Availability: 2

    In stock

    €2.893,00
    excl. VAT €3.500,53 incl.

  • Commercial Vertical Slicer, Ø 300 mm (14") "Delicatessen" Commercial Vertical Slicer, Ø 300 mm (14") "Delicatessen"

    Diamond Commercial Vertical Slicer, Ø 300 mm (14") "Delicatessen"

    In stock

    Version with vertical blade. Double-feed carriage with a clamping arm holding firmly in place all cold meats. Cutting capacity 275 mm, plate 275xh260 mm. Cutting thickness 0-30 mm.   Rounded design with no corners, no sharp edges and no visible screws. Hardened steel blade (Ø 300mm), chrome-plated and ground, with fixed protection ring and blade cover fitted with microswitch (100% safety). Chrome-plated, ground and polished carriage axle. Carriage on stainless steel ball bearings, easy, silent sliding, chrome-plated, ground and polished sliding bar, vulcanised rubber bumpers. Easily removable sail protection. Stainless steel blade guide with bayonet fitting. Integrated sharpener and semi-transparent cover for better visibility, with 2 grinding wheels and lower protection tray. Low-voltage 24V controls, IP 67 protection. Ventilated motor, bottom protection, with direct access to electrical components, sealing ring on transmission pulley. Made of anodised and polished cast aluminium alloy, stainless steel screws and bolts. Adjustable cylinders. Device built in compliance with the current (CE) standards. Technical Specification mm (W x D x H) : 540 x 520 x 570 - kW (elec) : 0.21 Category: Diamond Range: Dynamic Preparation Subrange: Slicers Family: Lame diam. 300 mm Subfamily: SPECIAL DELICATESSEN Line: TOP LINE Length: 540 mm Width: 520 mm Height: 570 mm Electric Power: 0.21 kW Weight: 32 kg Restock Info: Contact Supplier Delivery Delay: 35 Availability: 2

    In stock

    €2.444,00
    excl. VAT €2.957,24 incl.

  • Commercial Vertical Slicer, Ø 350 mm (14") "Delicatessen" Commercial Vertical Slicer, Ø 350 mm (14") "Delicatessen"

    Diamond Commercial Vertical Slicer, Ø 350 mm (14") "Delicatessen"

    In stock

    Vertical, straight-blade slicer. Double-feed carriage with a clamping arm holding firmly in place all types of hams and cold meats. Max. cutting capacity: 270xh250 (Ø 250 mm), slice thickness: 0-30 mm. 50 mm gap between blade and body.   Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe). Reinforced gauge plate, removable slider guard. A maintenance Kit comes standard (incl. blade extractor). Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard. End weight conceived for all shapes, even the smallest. All handles, knobs and feet made of full aluminium. Stainless steel screws (not visible) and deflector. Fan-cooled motor. Bottom enclosure panel . Transmission pulley protected with a retaining ring. Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure. Dual-action built-in sharpener with protection bottom enclosure. Adjustable feet. Machine complying with the current CE standards. Important: easy and safe cleaning thanks to:1°) Rounded design, no sharp edges and visible screws.2°) Wide gap between blade and body .3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".4°)Removable blade guard.5°) Permanent tapered blade ring guard.Technical Specification mm (W x D x H) : 600 x 660 x 715 - kW (elec) : 0.37 Category: Diamond Range: Dynamic Preparation Subrange: Slicers Family: Lame diam. 350 mm Subfamily: SPECIAL DELICATESSEN Line: SILVER LINE Length: 600 mm Width: 660 mm Height: 715 mm Electric Power: 0.37 kW Weight: 52 kg Restock Info: Contact Supplier Delivery Delay: 35 Availability: 3

    In stock

    €3.436,00
    excl. VAT €4.157,56 incl.

  • Commercial Vertical Slicer, Ø 350 mm (14") "Meat" Commercial Vertical Slicer, Ø 350 mm (14") "Meat"

    Diamond Commercial Vertical Slicer, Ø 350 mm (14") "Meat"

    In stock

    Vertical, straight-blade slicer. Double-feed carriage for slicing large joints of raw meat. Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm. 50 mm gap between blade and motor.   Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe). Reinforced gauge plate, removable slider guard. A maintenance Kit comes standard (incl. blade extractor). Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard. End weight conceived for all shapes, even the smallest. All handles, knobs and feet made of full aluminium. Stainless steel screws (not visible) and deflector. Fan-cooled motor. Bottom enclosure panel . Transmission pulley protected with a retaining ring. Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure. Dual-action built-in sharpener with protection bottom enclosure. Adjustable feet. Machine complying with the current CE standards. Important: easy and safe cleaning thanks to:1°) Rounded design, no sharp edges and visible screws.2°) Wide gap between blade and body .3°) Removable carriage system with gauge plate protecting blade edge at default slice thickness setting below "0".4°)Removable blade guard.5°) Permanent tapered blade ring guard.Technical Specification mm (W x D x H) : 685 x 660 x 560 - kW (elec) : 0.37 Category: Diamond Range: Dynamic Preparation Subrange: Slicers Family: Lame diam. 350 mm Subfamily: SPECIAL MEAT Line: SILVER LINE Length: 685 mm Width: 660 mm Height: 560 mm Electric Power: 0.37 kW Weight: 55 kg Restock Info: 11 Supplier Delivery Delay: 35 Availability: 0

    In stock

    €3.575,00
    excl. VAT €4.325,75 incl.

  • Complementary accessory: pipe 300 mm (MIV-30)

    Diamond Complementary accessory: pipe 300 mm (MIV-30)

    In stock

    Complementary accessory: pipe 300 mm (MIV-30)Diamond's Complementary accessory is a high-performance pipe designed for commercial kitchens. Its durable construction and reliable functionality make it ideal for various applications, including cooking, baking, and food preparation.The pipe features a robust design with a durable finish, ensuring long-lasting use and reliable performance.Technical specificationsTechnical Specification mm (H) : 340 Category: Diamond Range: Dynamic Preparation Height: 340 mm Weight: 1 kg

    In stock

    €134,82
    excl. VAT €163,13 incl.

  • Complementary accessory: pipe 400 mm (MAV-45)

    Diamond Complementary accessory: pipe 400 mm (MAV-45)

    In stock

    Diamond's Complementary Accessory: Pipe 400 mm (MAV-45) is a high-quality accessory designed for commercial kitchens. Constructed with durable materials, this pipe features a smooth finish and easy-to-clean design.Key Features: Durable construction Smooth finish Easy-to-clean design Technical specificationsTechnical Specification mm (H) : 430 Category: Diamond Range: Dynamic Preparation Height: 430 mm Weight: 1 kg

    In stock

    €151,94
    excl. VAT €183,85 incl.

  • Complementary accessory: pipe 400 mm (MIV-40)

    Diamond Complementary accessory: pipe 400 mm (MIV-40)

    In stock

    Diamond Complementary Accessory: Pipe 400mm (MIV-40)A high-quality pipe designed for commercial use in professional kitchens. Made from durable materials to withstand the rigors of heavy-duty cooking.Key Features: Durable and long-lasting construction Easy to clean and sanitize Technical specificationsTechnical Specification mm (H) : 440 Category: Diamond Range: Dynamic Preparation Height: 440 mm Weight: 1 kg

    In stock

    €134,82
    excl. VAT €163,13 incl.

  • Complementary accessory: pipe 500 mm (MAV-65)

    Diamond Complementary accessory: pipe 500 mm (MAV-65)

    In stock

    A versatile pipe made of durable stainless steel, designed for efficient material handling in commercial kitchens. Its sturdy construction ensures reliable performance and easy mobility.Key Features: Made from high-quality stainless steel Perfect for commercial kitchen use Technical specificationsTechnical Specification mm (H) : 530 Category: Diamond Range: Dynamic Preparation Height: 530 mm Weight: 2 kg

    In stock

    €151,94
    excl. VAT €183,85 incl.


You have seen 768 out of 6254 products

Diamond er et veletableret brand i den professionelle køkkenbranche, kendt for at levere højtydende udstyr designet til krævende miljøer. Hos Maxigastro.dk tilbyder vi et bredt udvalg af Diamond produkter skræddersyet til restauranter, hoteller, cateringvirksomheder og storkøkkener i hele Europa.

Diamond udstyr er bygget med stort fokus på kraft, holdbarhed og præcision. Uanset om du arbejder med madlavning med høj kapacitet, ventilation eller madlavning, Diamond produkter er designet til at fungere konsekvent under pres. Deres robuste konstruktion og avancerede komponenter gør dem ideelle til køkkener, hvor pålidelighed er afgørende.

Den Diamond Komfur omfatter professionelle ovne, friture, grill, kogelinjer og ventilationssystemer, alt sammen konstrueret til at imødekomme behovene ved intensiv daglig brug. Mange produkter er designet med fleksibilitet i tankerne, hvilket giver mulighed for problemfri integration i moderne køkkenopsætninger.

Bygget til køkkener med høj efterspørgsel

Diamond er særligt velegnet til virksomheder, der kræver kraftfuldt og effektivt udstyr. Fra travle restaurantkøkkener til store cateringvirksomheder er brandet kendt for at levere ensartede resultater, selv i myldretiden.

Hvorfor købe Diamond fra Maxigastro?

Hos Maxigastro.dk kombinerer vi et stærkt produkt Komfur med konkurrencedygtige priser og effektiv levering i hele Europa. Vores erfaring med professionelt køkkenudstyr sikrer, at du får den rigtige løsning til din virksomhed — uden at betale for meget.

Vi fokuserer på at levere værdi, pålidelighed og hurtig adgang til professionelt udstyr, der hjælper dig med at holde dit køkken kørende.

Professionelt udstyr du kan stole på

Hvis du leder efter kraftfuldt, holdbart køkkenudstyr af professionel kvalitet, Diamond er et bevist valg, som kokke og foodservice-professionelle har tillid til i hele Europa.

© 2026 Maxigastro, Made By MXGDEV

    • American Express
    • Apple Pay
    • Bancontact
    • BLIK
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account